Independent editorial research • US models • How our links work

COMPARISON / HOME BACKUP / 120V–240V

BLUETTI Apex 300 vs Anker SOLIX F3800: home backup, capacity and expansion

One unit that starts with more of everything, against a lighter system you build around over time. The specifications are not equivalent — and that is exactly what makes the choice clear.

WattPick Lab editorial desk · Updated · US models

Affiliate disclosure: WattPick Lab may earn a commission if you buy through links on this page, at no extra cost to you. Commissions do not influence which models we compare or what we conclude. How our links work.

Quick verdict

These two are not the same product at different prices. They are two different answers to the same question, and the answer you want depends on whether you are buying a unit or a system.

CHOOSE ONE

Choose BLUETTI Apex 300 if… or Anker SOLIX F3800 if…

IF YOU WANT MAXIMUM CAPABILITY FROM ONE UNIT

Anker SOLIX F3800

3,840Wh and 6,000W continuous from a single box, native 240V through NEMA 14-50 and L14-30, up to 2,400W solar, and a documented path to 12kW / 53.8kWh with two units. It starts bigger and stays bigger without accessories.

6,000W AC 3,840Wh base

  • You want 6,000 W and 240 V out of a single unit
  • You want the highest single-unit capacity in this pairing
  • You would rather not manage a multi-part system

IF YOU WANT A LIGHTER MODULAR SYSTEM

BLUETTI Apex 300

2,764.8Wh and 3,840W from a unit weighing 83.78 lb — nearly 50 lb less than the F3800. Supports 120V/240V, up to 2,400W solar, 6,000+ rated cycles and expansion to roughly 19.4kWh on one unit.

83.78 lb 6,000+ cycles

  • You want a system you assemble rather than one box you carry
  • Weight matters — it is nearly 50 lb lighter
  • You want to build capacity up over time

Two routes to the same job: a lighter base you expand, or one heavy box that does it all on day one. Affiliate links · price and bundle may change.

Side by side

Manufacturer-published specifications, US models, checked September 2026.
SpecificationBLUETTI Apex 300Anker SOLIX F3800
Base capacity2,764.8Wh3,840Wh
Battery chemistryLiFePO₄LFP / LiFePO₄
Rated AC output3,840W6,000W
High-load / surge7,680W Power Lifting9,000W surge
Voltage120V / 240V120V / 240V
240V outletsNEMA L14-50RNEMA 14-50 + L14-30
Max solar input2 × 1,200W (2,400W)Up to 2,400W
Max AC inputUp to 1,800WUp to 1,800W
Battery expansionUp to 6 batteries per unitUp to 6 batteries per unit
Max single-unit system~19.4kWh with 6 × B300K~26.9kWh with 6 batteries
Max multi-unit systemLarger multi-Apex configurations12kW / 53.8kWh with two F3800
UPS switching0ms / 20ms modes by configuration<20ms
AppWi-Fi + BluetoothWi-Fi + Bluetooth
Weight83.78 lb132.3 lb
Dimensions (in)20.67 × 12.87 × 12.627.6 × 15.3 × 15.6
Warranty5 years5 years

Peak, surge and Power Lifting figures are not continuous output and should not be compared against rated AC output. Expansion figures are manufacturer maximum-configuration claims.

The table immediately exposes the central trade-off: the F3800 gives you substantially more battery and inverter power from one box, and the Apex 300 is substantially smaller, lighter and cheaper to move.

Capacity: the F3800 starts about 39% ahead

F3800 starts at 3,840Wh and Apex 300 at 2,764.8Wh: F3800 has about 39% more nominal energy than the Apex base unit. Extra storage matters only against the actual load and recharge plan. Both base batteries can empty quickly under continuous high demand.

AC output: the largest single difference

F3800’s 6,000W continuous output offers more simultaneous load headroom than Apex 300’s 3,840W. Check startup demands, outlet ratings and supported modes. Output establishes which compatible loads may run; watt-hours establish duration.

What each can actually run

For each pump, HVAC unit, tool or RV connection, confirm voltage, continuous demand, startup requirements and the exact outlet/cable. Both are excessive for a modest electronics-only load. An EV or large air-conditioning load can consume substantial stored energy even when electrically compatible.

120V/240V: both reach serious home-backup territory

Both US platforms provide documented 120V/240V routes. Match the required connection equipment and operation mode. Home-circuit integration also requires compatible transfer equipment and installation. The original F3800’s product FAQ limits 240V output while charging through ordinary AC input; verify the intended charging/output combination.

Portability: not close

Apex 300 is listed at 83.78 lb, F3800 at approximately 132.3 lb. Apex is lighter by about 48.5 lb; F3800 includes wheels. Either needs a moving plan for stairs and vehicle loading. Dimensions, service space and separate batteries also matter.

Solar input: close at the base unit, different above it

Both base stations list up to 2,400W solar input. Higher system routes depend on additional equipment. Match voltage/current limits and cold-weather panel voltage to the exact manual. Compare realistic daily yield with daily consumption, not array nameplate watts alone.

Expansion: both grow, but not to the same place

Apex supports documented B300K/B500K configurations; F3800 uses its supported BP3800 route. Check quantity, cables, hubs and whether the quoted maximum is for one or several base stations. Adding batteries alone increases storage, not one unit’s continuous inverter rating.

UPS and battery longevity

Apex documentation distinguishes 20ms and 0ms modes; F3800 has its own stated switching behavior. Verify equipment compatibility and configuration rather than comparing the fastest headline mode alone. Published cycle ratings describe capacity retention under specified conditions, not a guaranteed calendar lifetime.

BLUETTI APEX 300

Light and modular

Strengths: much lighter at 83.78 lb; more compact; 120V/240V support; up to 2,400W direct solar with system-level options above it; 6,000+ rated cycles; 0ms UPS in supported modes; highly modular ecosystem.

Costs: lower base capacity at 2.76kWh; lower standalone inverter output at 3,840W; some functionality needs extra BLUETTI hardware; still heavy for casual handling.

ANKER SOLIX F3800

Maximum power in one box

Strengths: 6,000W continuous output; 3,840Wh base capacity; native 120V/240V; NEMA 14-50 and L14-30; up to 2,400W solar; huge expansion potential; integrated wheels.

Costs: extremely heavy at 132.3 lb; large physical footprint; 3,000+ cycle rating against BLUETTI's higher figure; may be more capacity than a modest backup plan needs.

Don't compare only the power station price

Compare the complete system needed for your actual loads: base unit, batteries, panels, cables, hubs, transfer equipment, installation and delivery. F3800 favors higher base output and energy; Apex favors a lighter modular starting point. A lower station-only price may disappear once both systems are configured for the same job.

Final verdict

Choose F3800 when the higher base inverter output and stored energy are required and its moving/charging constraints fit. Choose Apex when a lighter starting point and its supported modular route better fit the plan. Size the energy budget and compatible configuration before checking the final bundle price.

Sources & editorial method

Sources & methodology

Research checked September 24, 2026. This page covers the US versions of both models. Specifications come from official manufacturer documentation; every estimate is labelled as such. Expansion and maximum-configuration figures are manufacturer claims for specific hardware combinations and are not guaranteed results.

  1. BLUETTI Apex 300 product page &nearr; — base capacity, rated output, 120V/240V support, solar input, expansion options and weight.

Live offers and bundle contents should be checked at the retailer.