Independent editorial research • US models • How our links work

WYBOT C1: 1,615 sq ft coverage, wall and waterline cleaning, and where it fits

Affiliate disclosure: We may earn a commission when you buy through these links, at no additional cost to you. How our links work.

Quick verdict

The C1 is a mid-range cordless option when you need floor, wall and waterline cleaning. WYBOT lists up to 1,615 sq ft coverage, up to 150 minutes of operation and 3,038 GPH suction. These are published specifications.

Best fit: a compatible pool within the rated envelope, with ordinary debris and a preference for app-selectable modes. Skip it: when pool size exceeds the rating, fine-particle filtration is the main problem, or you specifically require the vision-based features of a different model.

Six published WYBOT C1 specifications: rated pool size up to 1,615 square feet, maximum runtime 150 minutes, suction rate 3,038 gallons per hour, a single 180 micrometre filter cartridge, five cleaning modes, and about 3 hours charging time. App control and a 2-year warranty are also listed. All figures are manufacturer specifications.
The C1's published figures sit squarely mid-range. The rated pool size and the single filtration stage are the two numbers to check against your own pool first.
View the full specification table
Manufacturer specifications
SpecificationPublished value
Rated pool sizeUp to 1,615 sq ft
Maximum runtimeUp to 150 minutes per charge
Suction rate3,038 GPH
FiltrationSingle 180µm filter cartridge
Cleaning modes5: Full Pool, Floor Only, Wall Only, Wall Then Floor, Eco Floor
NavigationS-path and N-path patterns; self-parking at the pool wall
Charging timeApproximately 3 hours
Surfaces coveredFloor, walls and waterline
App controlYes — mode customisation, scheduling and OTA updates
AI cleaningNot listed for the C1 (reserved for the C2 Vision)
Warranty2 years, per the WYBOT US product page

Sources: WYBOT C1 US product page ↗ and WYBOT model comparison (Help Me Choose) ↗. Checked September 2026.

Check debris before paying for more features

C1 uses a single large 180μm filter cartridge and dual PVC brushes. That is a straightforward configuration for ordinary debris, but very fine material can require different filtration. The published suction figure alone does not establish which particles are captured.

Rinse the removable cartridge after use and follow maintenance instructions. If fine debris repeatedly passes through your current filter, compare the exact C2 filter configuration rather than assuming stronger suction alone solves the problem.

Coverage and modes matter more than a mode count

WYBOT lists floor, wall and waterline coverage with selectable cleaning modes. Floor-only operation can direct the cycle at settled debris; other modes address different surfaces. Navigation claims do not guarantee complete coverage in every shaped pool.

Confirm the pool’s surface, geometry and operating requirements in the current manual. Area and runtime ratings describe an intended envelope, not a measured guarantee of a clean pool in one session.

App operation and the daily routine

The app supports mode customization, scheduling and OTA updates in the published description. Check the current connection and firmware instructions. A scheduled cycle still depends on usable battery charge, clean filters and the manufacturer’s immersion and retrieval guidance.

Plan charging and access for removing the robot. Cordless operation removes the cleaning cable from the deck; it does not eliminate lifting, filter care or the need to recharge between suitable cycles.

When to spend more on C2

The comparison material used for this review lists C2 at up to 2,152 sq ft and 180 minutes, with a different filtration and suction configuration. Those differences can justify a step up for a larger compatible pool or persistent fine-debris needs.

Keep C1 when its area, ordinary-debris filtration and full-surface coverage already fit. Do not transfer the C2 Vision’s AI features to C1 or treat every C2-family product as identical. Check the exact US model and filter kit in the offered bundle.

A cheaper floor-only route

If you do not need walls or the waterline, compare the A1. Its floor-only scope and lower rated area are the actual trade-offs. Use the pool-cleaner hub to continue from pool geometry and debris type rather than brand names alone.

The buying decision

Choose C1 for compatible full-surface cleaning within its rated envelope. Upgrade for a specific coverage or filtration deficit, and verify the exact model’s app, filter and maintenance requirements before ordering.

Sources & editorial method

Source documentation checked September 25, 2026. Specifications, prices and configurations can change; verify the exact model before ordering.

This review uses manufacturer documentation, certification records where available, and product specifications. Performance can vary with installation and operating conditions. Runtime and cost examples are labelled planning calculations. Check the exact US model, current documentation and seller configuration before ordering.

Sources & methodology

Research checked September 25, 2026. This article covers the US WYBOT C1. We use official documentation for specifications and use the manufacturer's own published specifications for model-to-model differences. Performance varies with pool conditions, debris and operating settings.

  1. WYBOT C1 US product page ↗ — rated pool size, runtime, suction, filtration, modes, charging and warranty.
  2. WYBOT model comparison (Help Me Choose) ↗ — C1 vs C2 specifications, including the dual-filtration and AI-cleaning differences.

Live offers and bundle contents should be checked at the retailer.